Children's Seat Belt DLD001-1

Children’s Integrative Safety Seats

Introduction: For children between 9 months to 4 years of age, under weight of 18 kgs.

How to Use:

1. Seat belt tightness installation

Take the seat belts out from the buckles as follows:

1.2 Press the red button on the buckle, and take the two pieces of male tabs out.

1.3 Choose the right seat belt holes according to the child’s height. If it needs adjusting, first, remove the long belt on the back of the seat out from the iron buckle for seat belt fastening at the bottom and the adjuster buckle on another belt, then unfasten the adjuster buckle. Pull the two belts from the obverse of the seat, through the right hole, and then re-fasten the adjuster buckle on the short belt.

1.4 Put the child into the safety seat, leaving the protective pad for crotch and the buckle between his legs. If it is too tightened, unfasten the buckle at the bottom of the seat, set it forward and fasten it. Across the child’s arms separately, the two seat belts and the protective pad for shoulder are placed in the front.

1.5 Put the male tabs tightly into the buckle, pull the long belt on the back of the seat through the booster buckle at the bottom again, and then adjust the seat belt tightness across the iron buckle of the other belt. If you can put two fingers between the seat belt and the child’s chest, that will be OK. Then fasten the long belt on the back of the seat in the buckle, press the red button, take the male tabs out, and bring out the baby, the seat belt tightness suit for your child is installed.

-------------------------------------------------- ------------------------------

2. Installation of the safety seats and seat belts

2.1 The safety seat should be fixed in the back seat of the vehicle where there is a standard seat belt.

2.2 Pull the seat belt of the vehicle through the hole on the back of the safety seat, and insert the male tab into the buckle on the other side. Then you will hear the sound "Clark ". Pull the male tab hard to make sure that it is fixed. Check that whether the safety belt forms a knot.

2.3 Shake the safety seat and tighten the seat belt of the vehicle at the same time to make it fixed in the car seat. Take out the iron buckle for seat belt fixation under the handle on the back of the safety seat. Align the two seat belts and pull them through the iron buckle. Be sure that the distance between the buckle and the male tab of the seat belt is less than 13mm.

-------------------------------------------------- ------------------------------

3. How to use the Children’s seat belts

3.1 Please make sure that the seat belts are tightened and the safety seat is tightly fixed whenever you use the children’s safety seat.

3.2 Press the red button on the buckle, take the male tabs out and put the child into the safety seat, leaving the protective pad for crotch between his legs, the two seat belts and the protective pad for shoulder placed in the front across the child’s arms separately.

3.3 Pull the two seat belts up and down to straighten them and adjust the degree of tightness, and then pull another seat belt through the hasp. The seat belt hasp should be placed in the front.

3.4 Reserve order to take the child out of the safety seat.

Parts of the safety seat