Seat Belt Extender DLG002

It includes grade 8.8 hex bolt nut and lock washer.

The extra length is about  12 inches,

30 degree bend end.

 Aperture is 12.5MM

It can add one foot of overall length to the seat systerm.Since it is easily added on to the restraist system where it connects to the door post (near or on the floor of the car).It adds overall length to the entire safety harness system.So the shoulder restraint portion remails centered on the passenger or driver.

Below is our simple 3 step installation instructions.

Our seat belt extender avoids both of the 2 common issues involved in adding an extension to the safety belt of your vehicle.

Many car manufacturers have not made extenders available to their car owners. One problem is that each auto manufacturer has different latching systems for their restraints, so it is virtually impossible to come up with a universal solution that can just be snapped onto the end of an existing seat belt.

The other problem is a safety issue. Honda, for instance, has been reluctant to supply an extender that can be clicked onto the male end of their 3 point (lap and over the shoulder) seat belts, and for good reason; it does appear to be less safe. When an extension is added to the "click-on" end of the belt, it re-aligns the shoulder harness portion of the seat belt towards the door. So the shoulder restraint becomes off-centered on the driver or passenger's body, which can allow the body to slip out from under the restraint more easily during impact.

With our extender, both of these above mentioned problems are solved! It can add one foot of overall length to the seatbelt system. Since this extension part is easily added on to the restraint system where it connects to the door post (near or on the floor of the car), it adds overall length to the entire safety restraint system; so the shoulder restraint portion remains centered on the occupant. When you sell your car you can easily remove your seatbelt extender and add it to your new car.